Item no. 401
Model / type of machineROTOLES 400 D-S
Category of machinesGrinder
| |

Gorzow Wielkopolski

Terms of Delivery
Cost of delivery


Startup Type



Severe unilateral milling ROTOLES calibrating the system designed for calibration and solid laminated timber. Through specialized machining (tool rotates in a horizontal position at right-hand performs processing speed on the principles of the router) it is possible to calibrate a very short workpieces without the formation of undercuts on the ends of the elements. The head is equipped with cutting knives made of carbide. Blades can be rotated to four times - four blades on the knife (praktyczniedwukrotnie).

Maszynaposiada constant working height and moving machining unit. Machining to set the aggregate thickness is controlled by an electromechanical gear. The thickness is adjusted electrically and displayed on the LCD monitor. Feed speed infinitely adjustable by means of an inverter which allows for proper surface treatment.
Feed is via the profiled rubber band. The system pressure is regulated pneumatic components. Placed on the machine element is pressed against the machine by means of rollers with a diameter? 89 mm.


- Working width up to 400 mm
- Thickness of the workpiece from 2 to 150 mm
- Element length of 160 mm min
- The power of 22 kw generator operating
- Engine power feed belt drive gear 3 kW
- Control unit thickness of 0.37 kW
- Spindle speed 2940 rev / min
- Number of blades 48
- Spindle diameter 520 mm
- Feed speed from 10 to 45 m / min
- Diameter of the exhaust? 200 mm
- Minimum air velocity of 30 m / sec.
- Total installed power 26 kW
- Weight 1800 kg
- Facing cutter blades in the system. Leucodur - HL 40 14x14x2 mm
- Infeed Table height from floor 900 mm
- Dimensions of the machine 2000x1500x2000 mm

The size of the calibration depends on the feed velocity, the width of the element and rządanej surface quality. The size of the given chip: with a minimum processing speed can be up to 8 mm, however, with widths in excess of 50% of the width it is possible to max 2 mm.



Mm thickness workpieces 2-150
Maximum Working Width mm 400
Minimum Working Length mm 160
Main Engine Power kW 22
Feeding motor power kW 3
Installed Power kW 26
Security Guards tak
Feed speed m / min 10-45
Technically Efficient tak
Very Good Condition tak
Machine weight kg 1800
Machine Dimensions L x W x H mm 2000x1500x2000

Inne maszyny w kategorii Szlifierki, Szczotkarki