Drill-through VITAP SIGMA 2 TAS

Item no. 387
Model / type of machineSIGMA 2 TAS
Category of machinesDrill-through
| |

Gorzow Wielkopolski

Terms of Delivery
Cost of delivery


Startup Type



Automatic drill-through VITAP
Type / model: 2TAS
Production Year: 2006
TECHNICAL Condition: Good

Technical Description:
The right team is moving levels and can move over vertical bands of mounted drills also. Drill a series of drilling alternating vertical / horizontal. The machine can be equipped with vertical drilling the lower bands with heads at 9 Rotating spindles. It is possible to order the special warheads. Lower vertical drilling unit is equipped with 2 motors 1.5 hp (1.1 kW) sliding on a sled and prepared for the compilation of the dome. The transverse motion of motors and heads turn is blocked by a pneumatic switch mounted on the front band. Adjusting the longitudinal drill team is very simple and is done by releasing the pressure and the slip displacement.

"Utility worktable 2 500 mm;
"2 teams horizontal drilling spindles after 21 prepared for the quick with engines of 2.5 hp (1.84 kW);
"Digital thickness control indicators;
"2 pneumatic bumpers;
"Component-based pneumatic bumpers - front and side;
"Wheelbase 32 mm spindles.
"Lower vertical drilling unit is equipped with 2 motors 1.5 hp (1.1 kW) sliding on the sled
"Number of vertical drilling units: 3 pcs. (Each team with two heads after 9 spindles)



Lack of technical parameters associated with the machine

Other machines of the drill-through

Other machines of this manufacturer