Band-saw LIGNUM Kargow MM-700/2 POZIOM

Item no. 366
43.500,00 PLN net
Model / type of machineMM-700/2 POZIOM
Category of machinesBand-saw
| |

Gorzow Wielkopolski

Terms of Delivery


Cost of delivery


Startup Type



Trak belt type MM-700 / 2 level is designed for longitudinal sawing wood in the form of beams and boards krawędziaków. Trak is used in sawmills and in the furniture industry.
This device is equipped with two systems combined with each cutting. The whole install is mounted, whose length depends on the individual customer requirements. For standard equipment consists of a sawmill: Programmer ISP thickness -10, tensioner hydraulic band saw - 2 pieces. , Feed inverter, working table with torowiskiem, double cutting system. As options are debarkers equipment, one for each cutting system, and full hydraulics, whose task is to maneuver logs in order to set it in the optimum position for the cutting process. Setting the cutting heads is carried out independently by the programmer thickness. Due to the two cutting heads sawmill productivity increased by 55% compared to the performance of MM-mill jednogłowicowego technical 700HK.Dane:
Wheel Diameter Tape
475 mm
The maximum diameter of cut logs

1000 mm
Maximum length of cut logs (by contract)

12000 mm
The thickness of 0,87-1,10 mm band saw
Width of band saw 31,7-38,0 mm
Divorced 1.5 - 2 mm
Clearance levels
750 mm
Vertical Clearance
1000 mm
Max. feed speed
20 m / min.

Main drive motor power

2 x 11 KW
Feed drive motor power work
0.55 kW
Vertical drive motor power
0.37 kW
Length of track (by contract) 8000-14000 mm


Lack of technical parameters associated with the machine

Other machines of the Band Saws